 |
ZC-200W
Sentek
Z-wave Door/Window sensor
Sentek’s ZC-200W recessed sensor is a battery-powered Z-wave magnetic door/window contact sensor. ZC-200W send radio signals when the Switch and actuate-magnet separate. By take advantage of Z-wave mesh network, commands can be routed to their destination via intermediary “listening” Z-Wave products. Products that are Z-Wave certified can be used and communicate with other Z-wave certified devices The Sentek Door/Window Sensor is designed for use with scenes in home automation systems, alarm and surveillance systems and everywhere else where information related to opening / closing of doors, windows, garage gates, etc. is needed. Suitable for smart home system.
• Flush mount for door/window etc
• Use Z-wave Plus Protocol.
• One Tamper switches built.
• The tamper switch used for programing also.
• Remote LED enable for detection indication from CIE.
• A big cover available for big hole mounting.
• Powered battery, for 2 year lite time (50 cycle/day).
• Meet EN50131-2-6 Grade 2, Class II.
• Meet UL634.
Power Supply | Single ER14250 3.6V battery |
Operating Temp | 0 – 40 °C |
Radio Protocol | Z-Wave Plus |
Radio Frequency | ZM-200WE: 868,4 MHz EU ZM-200WU: 908,4 MHz US ZM-200WO: 921,4 MHz AU/NZ ZM-200WR: 869,2 MHz RU |
Range | up to 30 meters indoors, depending on building materials used and the building structure |
Dimensions (LxWxH) | 19*62 mm |
Z-wave Door/Window sensor
Sentek’s ZC-200W recessed sensor is a battery-powered Z-wave magnetic door/window contact sensor. ZC-200W send radio signals when the Switch and actuate-magnet separate. By take advantage of Z-wave mesh network, commands can be routed to their destination via intermediary “listening” Z-Wave products. Products that are Z-Wave certified can be used and communicate with other Z-wave certified devices The Sentek Door/Window Sensor is designed for use with scenes in home automation systems, alarm and surveillance systems and everywhere else where information related to opening / closing of doors, windows, garage gates, etc. is needed. Suitable for smart home system.
• Flush mount for door/window etc
• Use Z-wave Plus Protocol.
• One Tamper switches built.
• The tamper switch used for programing also.
• Remote LED enable for detection indication from CIE.
• A big cover available for big hole mounting.
• Powered battery, for 2 year lite time (50 cycle/day).
• Meet EN50131-2-6 Grade 2, Class II.
• Meet UL634.
Power Supply | Single ER14250 3.6V battery |
Operating Temp | 0 – 40 °C |
Radio Protocol | Z-Wave Plus |
Radio Frequency | ZM-200WE: 868,4 MHz EU ZM-200WU: 908,4 MHz US ZM-200WO: 921,4 MHz AU/NZ ZM-200WR: 869,2 MHz RU |
Range | up to 30 meters indoors, depending on building materials used and the building structure |
Dimensions (LxWxH) | 19*62 mm |
