 |
CO-530
Sentek
Carbon Monoxide Detector
CO530 serie alarms is single and mulitple station carbon monoxide alarms, indented for protection in ordinary indoor locations of dwelling units, including recreational vehicles, mobile homes,and recreational boats with enclosed accommodation spaces and cockpit areas. CO530 with relay intended for monitoring the environment and intended for open area protection and for connection to a compatible power or control unit for operation as part of CO detection or emergency signaling system, or intended for control of Ventilation or shut off devices such as fans or control valves. The unit is designed for DC wire-in appliation, The gas alarm can be mountned on ceiling or wall.
• To detect CO gas (Cabon Monoxide)
• Sensitivity can be calibrated into either UL2034 or EN50291 standards
• Figaro semiconductor sensor heads with UL approval for CO detection
• Loud 75dB sound signal at alarm mode
• Advanced detection and discrimination algorithms
• Easy installation and maintenance, Sleek low-profile housing design
• SMD circuit board design
• Magnet test feature
• Five-year limited warranty
Model | Gas Monitored | 2/4 Wire | Operating Voltage | Output | Standby Current 12V /24V | Alarm Current 12V/24V | Base Mode |
CO530 | Carbon monoxide gas | - | 12~24Vdc | - | 85mA / 50mA | 85mA / 50mA | P/N852001 |
CO530R | Carbon monoxide gas | 4 | 12/24Vdc | Relay | 85mA / 50mA | 85mA / 50mA | P/N854001 |
Unit Dimensions | 98mm (Diameter) x 47 mm (Height) |
Operating Temperature | -10°C to +50°C |
Ambient Humidity | 5%~95% RH |
Alarm Horn | >75dB with Auto-reset at 3m (10 feet) |
Power Consumption | 2W |
Time to alarm | 70ppm within 75minutes 150ppm within 35 minutes 400ppm within 10minutes |
| Notice: the sensitivity can be cablicarated according to UL or EN standard | |
Carbon Monoxide Detector
CO530 serie alarms is single and mulitple station carbon monoxide alarms, indented for protection in ordinary indoor locations of dwelling units, including recreational vehicles, mobile homes,and recreational boats with enclosed accommodation spaces and cockpit areas. CO530 with relay intended for monitoring the environment and intended for open area protection and for connection to a compatible power or control unit for operation as part of CO detection or emergency signaling system, or intended for control of Ventilation or shut off devices such as fans or control valves. The unit is designed for DC wire-in appliation, The gas alarm can be mountned on ceiling or wall.
• To detect CO gas (Cabon Monoxide)
• Sensitivity can be calibrated into either UL2034 or EN50291 standards
• Figaro semiconductor sensor heads with UL approval for CO detection
• Loud 75dB sound signal at alarm mode
• Advanced detection and discrimination algorithms
• Easy installation and maintenance, Sleek low-profile housing design
• SMD circuit board design
• Magnet test feature
• Five-year limited warranty
Model | Gas Monitored | 2/4 Wire | Operating Voltage | Output | Standby Current 12V /24V | Alarm Current 12V/24V | Base Mode |
CO530 | Carbon monoxide gas | - | 12~24Vdc | - | 85mA / 50mA | 85mA / 50mA | P/N852001 |
CO530R | Carbon monoxide gas | 4 | 12/24Vdc | Relay | 85mA / 50mA | 85mA / 50mA | P/N854001 |
Unit Dimensions | 98mm (Diameter) x 47 mm (Height) |
Operating Temperature | -10°C to +50°C |
Ambient Humidity | 5%~95% RH |
Alarm Horn | >75dB with Auto-reset at 3m (10 feet) |
Power Consumption | 2W |
Time to alarm | 70ppm within 75minutes 150ppm within 35 minutes 400ppm within 10minutes |
| Notice: the sensitivity can be cablicarated according to UL or EN standard | |
