 |
BR-1013
Sentek
• 3/8" diameter press to fit
• Standard 18" #22 AWG leads
• Special leads upon request
• Switch or magnet are available separately
• Resistor, Diode and Supervisory Loop available on request
• Build-in Resistors or Diodes on quest
• Colors: White, Brown, Grey
Part Number | Loop Type | Reed Form | Closed Gap [Inch(mm)] | Depature Gap [Inch(mm)] | Maximum Initial Contact Resistance (Ohm) | Maximum Contact Rating (W) | Maximum Switching Voltage (VDC/VAC) | Maximum Switching Current (A) |
BR-1013 | Closed | N/O | 1(25) | 1.1(28) | 0.150 | 10 | 100 | 0.5 |
BR-1013XWG | Closed | N/O | 1 1 / 4(37) | 1.81(46) | 0.150 | 10 | 100 | 0.5 |
BR-1013DM | Closed | N/O | 3 / 4(19) | 0.87(22) | 0.150 | 10 | 100 | 0.5 |
BR-1013DMWG | Closed | N/O | 1 1 / 4(31) | 1.3 (33) | 0.150 | 10 | 100 | 0.5 |
BR-1013A | Open | N/O | 7 / 8(22) | 0.150 | 3 | 30 | 0.2 | |
BR-1013C | Closed & Open | N/O | 7 / 8(22) | 0.150 | 3 | 30 | 0.2 | |
BR-1013DMA | Open | N/C | 5 / 8(15) | 0.150 | 3 | 30 | 0.2 | |
BR-1013DMC | Closed & Open | SPDT | 5 / 8(15) | 0.150 | 3 | 30 | 0.2 | |
BR-1013DMWGA | Open | N/C | 1(25) | 0.150 | 3 | 30 | 0.2 | |
BR-1013DMWGC | Closed & Open | SPDT | 1(25) | 0.150 | 3 | 30 | 0.2 |
* BR-1013XWG magnetic contact switches shall be installed so that a door or other movable opening cannot be opened more than 2 inches (51mm) without initiating
an alarm. Switches exceeding 2 inches can not be installed per UL681-the Standard for installation and Classification of Burglar and Holdup Alarm
• 3/8" diameter press to fit
• Standard 18" #22 AWG leads
• Special leads upon request
• Switch or magnet are available separately
• Resistor, Diode and Supervisory Loop available on request
• Build-in Resistors or Diodes on quest
• Colors: White, Brown, Grey
Part Number | Loop Type | Reed Form | Closed Gap [Inch(mm)] | Depature Gap [Inch(mm)] | Maximum Initial Contact Resistance (Ohm) | Maximum Contact Rating (W) | Maximum Switching Voltage (VDC/VAC) | Maximum Switching Current (A) |
BR-1013 | Closed | N/O | 1(25) | 1.1(28) | 0.150 | 10 | 100 | 0.5 |
BR-1013XWG | Closed | N/O | 1 1 / 4(37) | 1.81(46) | 0.150 | 10 | 100 | 0.5 |
BR-1013DM | Closed | N/O | 3 / 4(19) | 0.87(22) | 0.150 | 10 | 100 | 0.5 |
BR-1013DMWG | Closed | N/O | 1 1 / 4(31) | 1.3 (33) | 0.150 | 10 | 100 | 0.5 |
BR-1013A | Open | N/O | 7 / 8(22) | 0.150 | 3 | 30 | 0.2 | |
BR-1013C | Closed & Open | N/O | 7 / 8(22) | 0.150 | 3 | 30 | 0.2 | |
BR-1013DMA | Open | N/C | 5 / 8(15) | 0.150 | 3 | 30 | 0.2 | |
BR-1013DMC | Closed & Open | SPDT | 5 / 8(15) | 0.150 | 3 | 30 | 0.2 | |
BR-1013DMWGA | Open | N/C | 1(25) | 0.150 | 3 | 30 | 0.2 | |
BR-1013DMWGC | Closed & Open | SPDT | 1(25) | 0.150 | 3 | 30 | 0.2 |
* BR-1013XWG magnetic contact switches shall be installed so that a door or other movable opening cannot be opened more than 2 inches (51mm) without initiating
an alarm. Switches exceeding 2 inches can not be installed per UL681-the Standard for installation and Classification of Burglar and Holdup Alarm
